© 2022 All rights reserved
Δημιουργία Ιστοσελίδας – Opticweb
Menu
Aqua Filter FP3-K2 is a powerful three-stage drinking water filtration system. Uses three 2″x10″ filters (standard world market dimension) for easy replacement.
FP3-K2 works in a targeted manner to remove a variety of pollutants from tap water without affecting the minerals and trace elements that are beneficial to the body. Made in the EU.
Removes dirt, sand, mud, rust, sediments, microparticles and suspended solids up to 20 microns. Ideal solid filter for all filtration systems. The mission of the filter is to protect carbon filters of equal or less permeability in the subsequent filtration stages from clogging. The service life of the filter usually ranges from 3 to 12 months, depending on the water quality, the transmission network, etc. The filter should be checked at regular intervals to ensure the adequacy of water in the system. The operating temperature of the filter is from 5 ° C - 35 ° C and its dimension is 2 "X 10" Inches.
The NSF-approved solid coconut shell filter provides maximum protection against chlorine, pesticides and organic pollutants. The use of solid activated carbon favors the large supply and treatment of water with minimal pressure drop in the system. The service life of the filter usually ranges from 3 to 12 months, depending on the water quality, the transmission network, etc. The filter should be checked at regular intervals to ensure the adequacy of water in the system. The operating temperature of the filter is from 5 ° C - 35 ° C and its dimension is 2 "X 10" Inches.
Removes dirt, sand, mud, rust, sediments, microparticles and suspended solids up to 5 microns. Ideal solid filter for all filtration systems. The mission of the filter is to protect carbon filters of equal or less permeability in the subsequent filtration stages from clogging. The service life of the filter usually ranges from 3 to 12 months, depending on the water quality, the transmission network, etc. The filter should be checked at regular intervals to ensure the adequacy of water in the system. The operating temperature of the filter is from 5 ° C - 35 ° C and its dimension is 2 "X 10" Inches.
The FP3-K2 set includes:
1) One piece x Polypropylene Filter 2 ″ x 10 ″ FCPS20
2) One piece x Solid Activated Carbon Filter 2 ″ x 10 ″ FCCBL
3) One piece x Polypropylene Filter 2 ″ x 10 ″ FCPS5
The filters should be changed every 6-12 months
The degree of effectiveness of filtration systems is sufficient to remove any harmful elements from drinking water. Based on the legislation of Greece and the EU. in all residential areas and settlements the disinfection of water by chlorination should be ensured. Thus all filtration systems filter chlorinated water. Of course, you remove chlorine 100% from the filtration systems, which can be two, three to seven stages depending on the needs of the consumer. In areas where there is no water disinfection treatment, the consumer should check its suitability in a certified microbiological laboratory before using it and before selecting any filter.
At Aqua Pure, whatever water filtration product we have for sale, we have made sure that the entire range of its spare parts is available at the same time. You will find the most modern technological water filters. Water filters follow the international standard (they are not unique) and can be used in different brands of filter cases (provided that it follows this international standard), this results in healthy competition and filters have a low cost . We do not have telemarketing filters that are of questionable quality, origin, have too high of a purchase cost and are unique (the consumer is obliged to buy the specific type of filter and brand).
© 2022 All rights reserved
Δημιουργία Ιστοσελίδας – Opticweb